Learning The “Secrets” of Resources

Wood Preservation Methods

The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. To be able to study wood it has to be compared to other products. The wood is checked against the other materials properties, performances, value, and work-ability. Wood has many advantages and this technology takes the advantages and utilizes them. Wood can be applied in very many applications, and this gives it an upper hand over other materials. Wood is renewable, and this makes it more precious. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.

The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. Wooden structures have to be kept away from water and pests that eat through the wood. The water particles in the timber increase the rotting and the insects bore through the wood. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. The protection of from this chemical is based on copper. As effective as this preservative, it has some downside to its use. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. Timber being used around a water body will be dipped in a more saturated fluid than that being used above ground.

The use of copper metal is another method of wood treatment that is fast being accepted. This method is being accepted fast because is friendly to wooden fasteners. An alternative name to be given to this method is the micronized copper wood preservative method. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The wood products protected using this method last longer.

Termites cannot eat through timber treated through this method. It has also shown to be an improvement in corrosion resistant properties to metal fasteners. When you use this method to treat wood, then you will not need to worry for at least ten years.